Assign Read/Write Access to a User on Specific Directory in Linux

In a previous article, we showed you how to create a shared directory in Linux. Here, we will describe how to give read/write access to a user on a specific directory in Linux.

There are two possible methods of doing this: the first is using ACLs (Access Control Lists) and the second is creating user groups to manage file permissions, as explained below.

For the purpose of this tutorial, we will use following setup.

Operating system: CentOS 7
Test directory: /shares/project1/reports 
Test user: tecmint
Filesystem type: Ext4

Make sure all commands are executed as root user or use the the sudo command with equivalent privileges.

Let’s start by creating the directory called reports using the mkdir command:

# mkdir -p /shares/project1/reports   				

Using ACL to Give Read/Write Access to User on Directory

Important: To use this method, ensure that your Linux filesystem type (such as Ext3 and Ext4, NTFS, BTRFS) support ACLs.

1. First, check the current file system type on your system, and also whether the kernel supports ACL as follows:

# df -T | awk '{print $1,$2,$NF}' | grep "^/dev"
# grep -i acl /boot/config*

From the screenshot below, the filesystem type is Ext4 and the kernel supports POSIX ACLs as indicated by the CONFIG_EXT4_FS_POSIX_ACL=y option.

Check Filesystem Type and Kernel ACL Support
Check Filesystem Type and Kernel ACL Support

2. Next, check if the file system (partition) is mounted with ACL option or not:

# tune2fs -l /dev/sda1 | grep acl
Check Partition ACL Support
Check Partition ACL Support

From the above output, we can see that default mount option already has support for ACL. If in case it’s not enabled, you can enable it for the particular partition (/dev/sda3 for this case):

# mount -o remount,acl /
# tune2fs -o acl /dev/sda3

3. Now, its time to assign a read/write access to a user tecmint to a specific directory called reports by running the following commands.

# getfacl /shares/project1/reports       		  # Check the default ACL settings for the directory 
# setfacl -m user:tecmint:rw /shares/project1/reports     # Give rw access to user tecmint 
# getfacl /shares/project1/reports    			  # Check new ACL settings for the directory
Give Read/Write Access to Directory Using ACL
Give Read/Write Access to Directory Using ACL

In the screenshot above, the user tecmint now has read/write (rw) permissions on directory /shares/project1/reports as seen from the output of the second getfacl command.

For more information about ACL lists, do check out our following guides.

  1. How to Use ACLs (Access Control Lists) to Setup Disk Quotas for Users/Groups
  2. How to Use ACLs (Access Control Lists) to Mount Network Shares

Now let’s see the second method of assigning read/write access to a directory.

Using Groups to Give Read/Write Access to User on Directory

1. If the user already has a default user group (normally with same name as username), simply change the group owner of the directory.

# chgrp tecmint /shares/project1/reports

Alternatively, create a new group for multiple users (who will be given read/write permissions on a specific directory), as follows. However, this will create a shared directory:

# groupadd projects

2. Then add the user tecmint to the group projects as follows:

# usermod -aG projects tecmint	    # add user to projects
# groups tecmint	            # check users groups

3. Change the group owner of the directory to projects:

# chgrp	projects /shares/project1/reports

4. Now set read/write access for the group members:

# chmod -R 0760 /shares/projects/reports
# ls  -l /shares/projects/	    #check new permissions

That’s it! In this tutorial, we showed you how to give read/write access to a user on a specific directory in Linux. If any issues, do ask via the comment section below.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Aaron Kili
Aaron Kili is a Linux and F.O.S.S enthusiast, an upcoming Linux SysAdmin, web developer, and currently a content creator for TecMint who loves working with computers and strongly believes in sharing knowledge.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

3 thoughts on “Assign Read/Write Access to a User on Specific Directory in Linux”

  1. Is there a way you can ban the: change root password?

    Here I have a case where the user is granted root privileges, the user enters the admin’s root change password by themselves.

    Reply
    • @Nguyentony,

      Actually not possible, but you can do it with the following exception.
      1. First, add the users you want to lock down to a group.
      2. Next, edit the sudoer’s file with the visudo command.
      3. Add the following lines to the sudoer’s file (testgroup is the group you added the users to).

      %testgroup    ALL = (ALL)       ALL
      %testgroup    ALL = /usr/bin/passwd [A-Za-z]*, !/usr/bin/passwd root
      %testgroup    ALL = !/usr/sbin/visudo
      

      Note: This prevents the sudo users from changing the root password.

      Reply
  2. Hi,

    I need to let the normal users create their own subdirectories and upload any document to that directories. I have enabled a shared location via nginx, and I could see the shared location when I type the server’s IP in a web browser. But I am not sure how to enable the other part of the requirement. Can you help, please?

    I have given full permission to the group thru setfacl. but it is not giving me any option in the web browser to create any directory there itself and upload files. Please suggest

    Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.