How to Find Out List of All Open Ports in Linux

In this article, we will briefly talk about ports in computer networking and move to how you can list all open ports in Linux.

In computer networking, and more definitely in software terms, a port is a logical entity which acts as a endpoint of communication to identify a given application or process on an Linux operating system. It is a 16-bit number (0 to 65535) which differentiates one application from another on end systems.

The two most popular Internet transport protocols, Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP) and other less known protocols use port numbers for communication sessions (source and destination port numbers in conjunction with the source and destination IP addresses).

In addition, a combination of an IP address, port and protocol such as TCP/UDP is known as a socket, and every service must have a unique socket.

Below are the different categories of ports:

  1. 0-1023 – the Well Known Ports, also referred to as System Ports.
  2. 1024-49151 – the Registered Ports, also known as User Ports.
  3. 49152-65535 – the Dynamic Ports, also referred to as the Private Ports.

You can view a list of different applications and port/protocol combination in /etc/services file in Linux using cat command:

$ cat /etc/services 
OR
$ cat /etc/services | less
Network Services and Ports
# /etc/services:
# $Id: services,v 1.48 2009/11/11 14:32:31 ovasik Exp $
#
# Network services, Internet style
# IANA services version: last updated 2009-11-10
#
# Note that it is presently the policy of IANA to assign a single well-known
# port number for both TCP and UDP; hence, most entries here have two entries
# even if the protocol doesn't support UDP operations.
# Updated from RFC 1700, ``Assigned Numbers'' (October 1994).  Not all ports
# are included, only the more common ones.
#
# The latest IANA port assignments can be gotten from
#       http://www.iana.org/assignments/port-numbers
# The Well Known Ports are those from 0 through 1023.
# The Registered Ports are those from 1024 through 49151
# The Dynamic and/or Private Ports are those from 49152 through 65535
#
# Each line describes one service, and is of the form:
#
# service-name  port/protocol  [aliases ...]   [# comment]

tcpmux          1/tcp                           # TCP port service multiplexer
tcpmux          1/udp                           # TCP port service multiplexer
rje             5/tcp                           # Remote Job Entry
rje             5/udp                           # Remote Job Entry
echo            7/tcp
echo            7/udp
discard         9/tcp           sink null
discard         9/udp           sink null
systat          11/tcp          users
systat          11/udp          users
daytime         13/tcp
daytime         13/udp
qotd            17/tcp          quote
qotd            17/udp          quote
msp             18/tcp                          # message send protocol
msp             18/udp                          # message send protocol
chargen         19/tcp          ttytst source
chargen         19/udp          ttytst source
ftp-data        20/tcp
ftp-data        20/udp
# 21 is registered to ftp, but also used by fsp
ftp             21/tcp
ftp             21/udp          fsp fspd
ssh             22/tcp                          # The Secure Shell (SSH) Protocol
ssh             22/udp                          # The Secure Shell (SSH) Protocol
telnet          23/tcp
telnet          23/udp

To list all open ports or currently running ports including TCP and UDP in Linux, we will use netstat, is a powerful tool for monitoring network connections and statistics.

List All Network Ports Using Netstat Command
$ netstat -lntu

Proto Recv-Q Send-Q Local Address               Foreign Address             State      
tcp        0      0 0.0.0.0:22                  0.0.0.0:*                   LISTEN      
tcp        0      0 0.0.0.0:3306                0.0.0.0:*                   LISTEN      
tcp        0      0 0.0.0.0:25                  0.0.0.0:*                   LISTEN      
tcp        0      0 :::22                       :::*                        LISTEN      
tcp        0      0 :::80                       :::*                        LISTEN      
tcp        0      0 :::25                       :::*                        LISTEN      
udp        0      0 0.0.0.0:68                  0.0.0.0:*                               

Where,

  1. -l – prints only listening sockets
  2. -n – shows port number
  3. -t – enables listing of tcp ports
  4. -u – enables listing of udp ports

You can also use ss command, a well known useful utility for examining sockets in a Linux system. Run the command below to list all your open TCP and UCP ports:

List All Network Ports Using ss Command
$ ss -lntu

Netid State      Recv-Q Send-Q               Local Address:Port       Peer Address:Port 
udp   UNCONN     0      0                    *:68                     *:*     
tcp   LISTEN     0      128                  :::22                    :::*     
tcp   LISTEN     0      128                  *:22                     *:*     
tcp   LISTEN     0      50                   *:3306                   *:*     
tcp   LISTEN     0      128                  :::80                    ::*     
tcp   LISTEN     0      100                  :::25                    :::*     
tcp   LISTEN     0      100                  *:25  

Make it a point to read through the man pages of the commands above for more usage information.

In summary, understanding the concept of ports in computer networking is very vital for system and network administrators. You can as well go through this netstat guide with simple, precise and well explained examples.

Last but not least, get in touch with us by sharing other methods for listing open ports in Linux or asking a question via the response form below.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Aaron Kili
Aaron Kili is a Linux and F.O.S.S enthusiast, an upcoming Linux SysAdmin, web developer, and currently a content creator for TecMint who loves working with computers and strongly believes in sharing knowledge.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

10 thoughts on “How to Find Out List of All Open Ports in Linux”

    • @Mike

      Thanks for sharing, I use a similar command to find process listening on a port like this:

      $ sudo netstat -tnlp | grep -w "PORT_HERE"
      

      Where:

      • -t – consider tcp ports.
      • -l – display only listening sockets.
      • -n – show numerical addresses.
      • -p – show the PID and name of the program socket belongs to.
      Reply
  1. Nice article, can I suggest using:

    # netstat -lntup
    OR
    # ss -lntup
    

    instead of:

    # netstat -lntu
    AND
    # ss -lntu
    

    The -p option will show the process/daemon/user/PID who opened the port.

    Again, nice article!

    Chris.

    Reply
  2. “a port is a logical entity which acts as a endpoint of communication to identify a given application or process on an Linux operating system”. A port does not identify any application or process as the same port can be used by different applications or processes. More correct would be to use the words “is associated with” or “used by” insted. Regards.

    Reply
  3. I guess in most occasions it would be good to add -p to display also the process which is listening on the respective port

    Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.