How to Use /proc File System to Monitor Your Linux System

Today, we will delve into the contents of the /proc directory to develop a better understanding of its functionalities. It’s important to note that the /proc directory is a common feature across all Linux distributions, irrespective of their flavor or architecture.

One misconception that we must immediately clarify is that the /proc directory is NOT a conventional file system in the traditional sense of the term.

It is a virtual file system that contains information about processes and other system-related data within the procfs. This file system is mapped to the /proc directory and is mounted during the system’s boot process.

What is /proc in Linux

The /proc file system serves as an interface to kernel data structures and runtime information, which provides a way for both users and applications to access detailed information about processes, system configuration, hardware, and more, by exposing this data through a hierarchy of virtual files.

To view a complete list of files and directories in the /proc file system, you can use the ls command as shown.

$ ls /proc
View Linux /proc File System
View Linux /proc File System

Navigating /proc in Linux

When you navigate to the /proc directory, you will notice that there are some familiar-sounding files, and then a whole bunch of numbered directories, each corresponding to a running process on the system.

$ cd /proc
$ ls
Navigate /proc File System
Navigate /proc File System

These numbered directories represent the processes, better known as process IDs (PIDs), and within them, a command that occupies them. The files contain system information such as memory (meminfo), CPU information (cpuinfo), and available filesystems.

Here are a few key files and directories you’ll encounter:

  • /proc/cpuinfo – List information about the CPU(s) on the system, such as the model, speed, and number of cores..
  • /proc/meminfo – List details about memory usage and statistics that contain the total amount of memory, free memory, and the memory used by each process.
  • /proc/filesystems – Contains a list of all the filesystems that are supported by the kernel.
  • /proc/sys – List configuration and runtime parameters for the kernel.
  • /proc/loadavg – Show system load average over different time intervals such as 1, 5, and 15 minutes.
  • /proc/self – A symbolic link to the process’s own directory.
  • /proc/stat – Contains a variety of statistics about the system, such as the number of processes running, the number of interrupts, and the amount of time spent in each CPU state.
  • /proc/uptime – Contains the amount of time the system has been running.
  • /proc/PID – Contains information about a specific process, where PID is the process ID.

Extracting System Information

The /proc/meminfo is used to show information about the memory usage and statistics of a Linux system, which contains a snapshot of various memory-related metrics, which can be useful for monitoring system performance and resource utilization.

$ cat /proc/meminfo
Show Memory Usage and Statistics of a Linux System
Show Memory Usage and Statistics of a Linux System

As you can see, /proc/meminfo contains a bunch of information about your system’s memory, including the total amount available (in kb) and the amount free on the top two lines.

Running the cat command on any of the files in /proc will output their contents. Information about any files is available in the man page by running:

$ man 5 /proc/<filename>

I will give you quick rundown on /proc’s files:

  • /proc/cmdline – Kernel command line information.
  • /proc/console – Information about current consoles including tty.
  • /proc/devices – Device drivers currently configured for the running kernel.
  • /proc/dma – Info about current DMA channels.
  • /proc/fb – Framebuffer devices.
  • /proc/filesystems – Current filesystems supported by the kernel.
  • /proc/iomem – Current system memory map for devices.
  • /proc/ioports – Registered port regions for input-output communication with the device.
  • /proc/loadavg – System load average.
  • /proc/locks – Files currently locked by kernel.
  • /proc/meminfo – Info about system memory (see above example).
  • /proc/misc – Miscellaneous drivers registered for the miscellaneous major devices.
  • /proc/modules – Currently loaded kernel modules.
  • /proc/mounts – List of all mounts in use by the system.
  • /proc/partitions – Detailed info about partitions available to the system.
  • /proc/pci – Information about every PCI device.
  • /proc/stat – Record or various statistics kept from the last reboot.
  • /proc/swap – Information about swap space.
  • /proc/uptime – Uptime information (in seconds).
  • /proc/version – Kernel version, gcc version, and Linux distribution installed.

Extracting Process Information

Within /proc’s numbered directories you will find a few files and links. Remember that these directories’ numbers correlate to the PID of the command being run within them.

For example, navigating to /proc/<PID> provides details such as:

  • /proc/<PID>/cmdline – Command-line arguments used to start the process.
  • /proc/<PID>/status – Detailed status information, including memory usage and process statistics.
  • /proc/<PID>/fd – Symbolic links to files opened by the process.

Let’s use an example to view a folder called /proc/12.

$ cd /proc/12
$ ls

If I run:

$ cat /proc/12/status

I get the following:

List Process PID Info
List Process PID Info

So, what does this mean? Well, the important part is at the top. We can see from the status file that this process belongs to rcu_tasks_rude_kthread. Its current state is idle, and its process ID is 12, obviously.

We also can see who is running this, as UID and GID are 0, indicating that this process belongs to the root user.

In any numbered directory, you will have a similar file structure, and the most important ones with their descriptions, are as follows:

  • cmdline – command line of the process
  • environ – environmental variables
  • fd – file descriptors
  • limits – contains information about the limits of the process
  • mounts – related information

You will also notice a number of links in the numbered directory:

  • cwd – a link to the current working directory of the process
  • exe – link to the executable of the process
  • root – link to the work directory of the process

This should get you started with familiarizing yourself with the /proc directory. It should also provide insight into how a number of commands obtain their info, such as uptime, lsof, mount, and ps, just to name a few.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Rob Krul
Rob is an avid user of Linux and Open Source Software, with over 15 years experience in the tech geek universe. Aside from experimenting with the many flavors of Linux, he enjoys working with BSDs, Solaris, and OS X. He currently works as an Independent IT Contractor.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

6 thoughts on “How to Use /proc File System to Monitor Your Linux System”

    • @Situn,

      In the Linux /proc directory, you’ll encounter a mix of files with different sizes including files with 0KB size. However, this doesn’t mean they are empty or lack content, but they are often used as interfaces to kernel data structures, configurations, or real-time information.

      Reply
  1. Minor issue – it’s /proc/consoles (with an s at the end).

    Also you might want to add mention of /proc/self and why this happens:

    $ cd /proc/self
    $ readlink -e .
    /proc/7803
    $ readlink -e /proc/self
    /proc/11257
    
    Reply
  2. Depending on what type of hardware you have, you can get a lot of information in some of the /proc files. Since you were asking specifically about your video card, you can run:

    $ cat /proc/pci
    

    If it is using an ISA slot, you can run the following:

    $ cat /proc/isapnp
    

    If you are looking for your hard drive info:

    $ cat /proc/scsi/scsi
    

    The man page of /proc/ will give you plenty of info about any file in the /proc directory.

    Of course, there are easier ways to obtain this information, and utilities that are much more script-friendly. lshw is the first:

    $ lshw -class disk
    

    There is also hwinfo:

    $ hwinfo --disk
    

    And the very script-friendly lsblk:

    $ lsblk -io KNAME,TYPE,SIZE,MODEL
    

    All three of those utilities are available through apt or yum.

    Reply
  3. Hi

    Just a question, what file in /proc will I know the brand of my hard disk? memory video card? is it all located in /proc?

    thanks

    Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.