Migrating LVM Partitions to New Logical Volume (Drive) – Part VI

This is the 6th part of our ongoing Logical Volume Management series, in this article we will show you how to migrate existing logical volumes to other new drive without any downtime. Before moving further, I would like to explain you about LVM Migration and its features.

LVM Migration
LVM Storage Migration

What is LVM Migration?

LVM migration is one of the excellent feature, where we can migrate the logical volumes to a new disk without the data-loss and downtime. The purpose of this feature is it to move our data from old disk to a new disk. Usually, we do migrations from one disk to other disk storage, only when an error occur in some disks.

Features of Migration

  1. Moving logical volumes from one disk to other disk.
  2. We can use any type of disk like SATA, SSD, SAS, SAN storage iSCSI or FC.
  3. Migrate disks without data loss and downtime.

In LVM Migration, we will swap every volumes, file-system and it’s data in the existing storage. For example, if we have a single Logical volume, which has been mapped to one of the physical volume, that physical volume is a physical hard-drive.

Now if we need to upgrade our server with SSD Hard-drive, what we used to think at first? reformat of disk? No! we don’t have to reformat the server. The LVM has the option to migrate those old SATA Drives with new SSD Drives. The Live migration will support any kind of disks, be it local drive, SAN or Fiber channel too.

Requirements

  1. Creating Flexible Disk Storage with Logical Volume Management – Part 1
  2. How to Extend/Reduce LVM’s in Linux – Part 2

There are two ways to migrate LVM partitions (Storages), one is using Mirroring method and other using pvmove command. For demonstration purpose, here I’m using Centos6.5, but same instructions can also be supported for RHEL, Fedora, Oracle Linux and Scientific Linux.

My Server Setup
Operating System :	CentOS 6.5 Final
IP Address	 :	192.168.0.224
System Hostname	 :	lvmmig.tecmintlocal.com

Step 1: Check for Present Drives

1. Assume we are already having one virtual drive named “vdb“, which mapped to one of the logical volume “tecmint_lv“. Now we want to migrate this “vdb” logical volume drive to some other new storage. Before moving further, first verify that the virtual drive and logical volume names with the help of fdisk and lvs commands as shown.

# fdisk -l | grep vd
# lvs
Check Logical Volume Disk
Check Logical Volume Disk

Step 2: Check for Newly added Drive

2. Once we confirm our existing drives, now it’s time to attach our new SSD drive to system and verify newly added drive with the help of fdisk command.

# fdisk -l | grep dev
Check New Added Drive
Check New Added Drive

Note: Did you see in the above screen, that the new drive has been added successfully with name “/dev/sda“.

Step 3: Check Present Logical and Physical Volume

3. Now move forward to create physical volume, volume group and logical volume for migration. Before creating volumes, make sure to check the present logical volume data under /mnt/lvm mount point. Use the following commands to list the mounts and check the data.

# df -h
# cd /mnt/lvm
# cat tecmint.txt
Check Logical Volume Data
Check Logical Volume Data

Note: For demonstration purpose, we’ve created two files under /mnt/lvm mount point, and we migrate these data to a new drive without any downtime.

4. Before migrating, make sure to confirm the names of logical volume and volume group for which physical volume is related to and also confirm which physical volume used to hold this volume group and logical volume.

# lvs
# vgs -o+devices | grep tecmint_vg
Confirm Logical Volume Names
Confirm Logical Volume Names

Note: Did you see in the above screen, that “vdb” holds the volume group tecmint_vg.

Step 4: Create New Physical Volume

5. Before creating Physical Volume in our new added SSD Drive, we need to define the partition using fdisk. Don’t forget to change the Type to LVM(8e), while creating partitions.

# pvcreate /dev/sda1 -v
# pvs
Create Physical Volume
Create Physical Volume

6. Next, add the newly created physical volume to existing volume group tecmint_vg using ‘vgextend command’

# vgextend tecmint_vg /dev/sda1
# vgs
Add Physical Volume
Add Physical Volume

7. To get the full list of information about volume group use ‘vgdisplay‘ command.

# vgdisplay tecmint_vg -v
List Volume Group Info
List Volume Group Info

Note: In the above screen, we can see at the end of result as our PV has added to the volume group.

8. If in-case, we need to know more information about which devices are mapped, use the ‘dmsetup‘ dependency command.

# lvs -o+devices
# dmsetup deps /dev/tecmint_vg/tecmint_lv

In the above results, there is 1 dependencies (PV) or (Drives) and here 17 were listed. If you want to confirm look into the devices, which has major and minor number of drives that are attached.

# ls -l /dev | grep vd
List  Device Information
List Device Information

Note: In the above command, we can see that major number with 252 and minor number 17 is related to vdb1. Hope you understood from above command output.

Step 5: LVM Mirroring Method

9. Now it’s time to do migration using Mirroring method, use ‘lvconvert‘ command to migrate data from old logical volume to new drive.

# lvconvert -m 1 /dev/tecmint_vg/tecmint_lv /dev/sda1
  1. -m = mirror
  2. 1 = adding a single mirror
Mirroring Method Migration
Mirroring Method Migration

Note: The above migration process will take long time according to our volume size.

10. Once migration process completed, verify the converted mirror.

# lvs -o+devices
Verify Converted Mirror
Verify Converted Mirror

11. Once you sure that the converted mirror is perfect, you can remove the old virtual disk vdb1. The option -m will remove the mirror, earlier we’ve used 1 for adding the mirror.

# lvconvert -m 0 /dev/tecmint_vg/tecmint_lv /dev/vdb1
Remove Virtual Disk
Remove Virtual Disk

12. Once old virtual disk is removed, you can re-check the devices for logical volumes using following command.

# lvs -o+devices
# dmsetup deps /dev/tecmint_vg/tecmint_lv
# ls -l /dev | grep sd
Check New Mirrored Device
Check New Mirrored Device

In the above picture, did you see that our logical volume now depends on 8,1 and has sda1. This indicates that our migration process is done.

13. Now verify the files that we’ve migrated from old to new drive. If same data is present at the new drive, that means we have done every steps perfectly.

# cd /mnt/lvm/
# cat tecmin.txt 
Check Mirrored Data
Check Mirrored Data

14. After everything perfectly created, now it’s time to delete the vdb1 from volume group and later confirm, which devices are depends on our volume group.

# vgreduce /dev/tecmint_vg /dev/vdb1
# vgs -o+devices

15. After removing vdb1 from volume group tecmint_vg, still our logical volume is present there because we have migrated it to sda1 from vdb1.

# lvs
Delete Virtual Disk
Delete Virtual Disk

Step 6: LVM pvmove Mirroring Method

16. Instead using ‘lvconvert’ mirroring command, we use here ‘pvmove‘ command with option ‘-n‘ (logical volume name) method to mirror data between two devices.

# pvmove -n /dev/tecmint_vg/tecmint_lv /dev/vdb1 /dev/sda1

The command is one of the simplest way to mirror the data between two devices, but in real environment Mirroring is used more often than pvmove.

Conclusion

In this article, we have seen how to migrate the logical volumes from one drive to other. Hope you have learnt new tricks in logical volume management. For such setup one should must know about the basic of logical volume management. For basic setups, please refer to the links provided on top of the article at requirement section.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Babin Lonston
I'm Working as a System Administrator for last 10 year's with 4 years experience with Linux Distributions, fall in love with text based operating systems.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

33 thoughts on “Migrating LVM Partitions to New Logical Volume (Drive) – Part VI”

  1. Does this mirror?

    "pvmove -n /dev/tecmint_vg/tecmint_lv /dev/vdb1 /dev/sda1"

    My understanding is it moves all the data from /dev/vdb1 to /dev/sda1 and deleted the original data.

    Reply
  2. How can we use lvconvet -m 0 *** if existing volume made of multiple disks. I have /data volume made of /dev/sda1 (100GB) & /dev/sdb1 (200GB). I have done the mirroring with /dev/sdc1 (310GB) . But when i run lvconvert -o m /dev/datvg/datalv /dev/sda1 it removed /dev/sdc1. Not the /dev/sda1 and /dev/sdb1.

    Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.