bd – Quickly Go Back to a Parent Directory Instead of Typing “cd ../../..” Redundantly

While navigating the file system via the command line on Linux systems, in order to move back into a parent directory (in a long path), we would normally issue the cd command repeatedly (cd ../../..) until we land in the directory of interest.

This can be so tedious and boring much of the time, especially for experienced Linux users or system administrators who carry out so many various tasks, and therefore hope to discover shortcuts to ease their jobs while operating a system.

In this article, we will review a simple but helpful utility for quickly moving back into a parent directory in Linux with the help of the bd tool.

bd is a handy utility for navigating the filesystem, it enables you to quickly go back to a parent directory without typing cd ../../.. repeatedly. You can reliably combine it with other Linux commands to perform a few daily operations.

How to Install bd in Linux Systems

On Debian-based and Arch Linux distributions, you can install bd from the default repositories using your package manager as shown.

$ sudo apt install bd       [On Debian, Ubuntu and Mint]
$ sudo pacman -S bd         [On Arch Linux]

On other distributions, run the following commands to download and install bd under /usr/bin/ using the wget command, make it executable and create the required alias in your ~/.bashrc file:

$ wget --no-check-certificate -O /usr/local/bin/bd https://raw.github.com/vigneshwaranr/bd/master/bd
$ chmod +rx /usr/local/bin/bd
$ echo 'alias bd=". bd -si"' >> ~/.bashrc
$ source ~/.bashrc

Note: To enable case-sensitive directory name matching, set the -s flag instead of -si in the alias created above.

To enable autocomplete support, run these commands:

$ sudo wget -O /etc/bash_completion.d/bd https://raw.github.com/vigneshwaranr/bd/master/bash_completion.d/bd
$ sudo source /etc/bash_completion.d/bd

How to Use bd in Linux Systems

Assuming you are currently in the following long directory path:

/media/aaronkilik/Data/Computer Science/Documents/Books/LEARN/Linux/Books/server

and you want to go to the Documents directory quickly, then simply type:

$ bd Documents

Then to go straight into the Data directory, you can type:

$ bd Data
Switch Between Directories Quickly
Switch Between Directories Quickly

Actually, bd makes it even more straightforward, all you need to do is just type bd <few starting letters> such as:

$ bd Doc
$ bd Da
Quickly Switch Directories
Quickly Switch Directories

Important: In case there is more than one directory with the same name up in the hierarchy, bd will move you into the closest without considering the immediate parent as explained in the example below.

For instance, in the path above, there are two directories with the same name Books, if you want to move into:

/media/aaronkilik/Data/ComputerScience/Documents/Books/LEARN/Linux/Books

Typing bd books will take you into:

/media/aaronkilik/Data/ComputerScience/Documents/Books
Move to 'Books' Directory Quickly
Move to the ‘Books’ Directory Quickly

Additionally, using bd within backticks in the form `bd <letter(s)>` prints out the path minus changing the current directory, so you can use `bd <letter(s)>` with other common Linux commands such as ls, echo, etc.

In the example below, am currently in the directory, /var/www/html/internship/assets/filetree and to print the absolute path, long-list the contents and sum up the size of all files in the directory html without moving into it, I can just type:

$ echo `bd ht`
$ ls -l `bd ht`
$ du -cs `bd ht`
Switch Directory with Listing
Switch Directory with Listing

Find out more about the bd tool on Github: https://github.com/vigneshwaranr/bd

That’s all! In this article, we showed reviewed a handy way of quickly navigating the filesystem in Linux using the bd utility.

Have your say via the feedback form below. Plus, do you know of any similar utilities out there, let us know in the comments as well.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Aaron Kili
Aaron Kili is a Linux and F.O.S.S enthusiast, an upcoming Linux SysAdmin, web developer, and currently a content creator for TecMint who loves working with computers and strongly believes in sharing knowledge.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

26 thoughts on “bd – Quickly Go Back to a Parent Directory Instead of Typing “cd ../../..” Redundantly”

  1. I’ve written a bash function in 5 minutes that does the same, why to install a tool for such trivial things?!

    function bd {
        cd $(pwd | grep -ioP ".*$*.*?/")
    }
    
    Reply
  2. if [ -n "$PS1" ]; then
    
        cd ()
        {
            while [[ "$*" =~ (^|/|\s)[.]{3,}($|/|/s).*$ ]]; do
                set -- "${@//.../..\/..}";
            done;
            builtin pushd "$@" > /dev/null && /bin/ls --almost-all --color=auto
        }
    fi
    
    # cd ... 
    # cd .... 
    # cd .....
    
    Reply
    • Just made a shell function that should do the same as the presented tool. I think that my solution is prettier than yours. What do you think about this approach?

      function bd {
          cd $(pwd | grep -ioP ".*$*.*?/")
      }
      
      Reply
      • I think our objective is very different, my function only intents to expand dots. The main challenge was to create it with one loop statement (I probably have to give that up), next was to only use builtins, external commands can be very resource demanding especially in a loop and adds unnecessary dependencies.

        second version… (https://pastebin.com/gCquQjQk)

        Reply
        • Ok, but instead of looping I just once call grep on the current path. I would think it’s more efficient than looping, but I’m not sure …

          Reply
          • # time cd ...
            real    0m0,005s
            user    0m0,001s
            sys     0m0,005s
            
            # cd /usr/local/bin/.../bin/.../bin (multiple expansion)
            real    0m0,006s
            user    0m0,002s
            sys     0m0,004s
            
            # time bd usr
            real    0m0,012s
            user    0m0,003s
            sys     0m0,011s
            
    • Hi Jesse! I’m the author. Long time back, Github had issues with their certificate so I had to change the instructions to ignore it so wget would be able to download the file.

      You can also just copying the contents file and write to /usr/local/bin/bd using an editor like vim. :)

      Reply
  3. No Do *not* install user files in /usr/bin! This is terrible advice. Put it in /usr/local/bin (that’s what it’s there for), or add a user dir like ~/.local/bin to your $PATH.

    Reply
  4. A simpler version of this, which just steps up one level in the directory tree is:

    alias ..='cd ..;ls'
    

    This creates a command “..” which goes back one directory and does an “ls”. I use it all the time.

    Reply
  5. Please don’t suggest using wget –no-check-certificate, that should only be for internal/local use where you can be confident of no MITM attacks.

    Also, when not using your Linux package manager to install a program, you should not be using /usr/bin. For a single user you can install to a folder in your home directory like ~/bin (and add that to your $PATH). Or to make it available to all users of a system you can use /usr/local/bin.

    Never download files as root. Instead of using `sudo wget` you should use wget as a normal user, check the contents of the file and then use sudo to install it to the desired location (here /etc/bash_completion.d/bd).

    Also, there’s no need to use `sudo source` and I’m not sure it would even work. Instead just use `source` as the current user.

    You have responsibilities as a technical writer to give good examples without creating potential security issues for your readers. Please think carefully about commands given in examples.

    Reply
    • @Bill

      Yes, it is always good to share with you guys and receive useful feedback like this. We will consider all you have stressed out here. Many thanks for the heads up.

      Reply
      • Yes, ‘sudo source‘ does not work. Also, you show wget being used to writing the file into /usr/bin/. This needs a sudo (but like Bill says, it shouldn’t be in /usr/bin/ and should be d/led and checked first). Also, looking at the github for bd, it seems it can be installed via a package manager now: https://github.com/vigneshwaranr/bd/issues/32

        Otherwise, thanks for posting this article. `bd` will prove very valuable to me. Thanks!

        Reply
        • @Flurrywinde

          Okay, many thanks for writing back, point taken. We’ll consider these important issues in future articles.

          Reply
  6. This command is really cool! I am going to install it right away. This is an excellent opportunity to remind the colleagues out there about a related set of commands: “pushd” and “popd“.

    Thanks and keep up the good work!

    Reply
    • @Raymond

      Many thanks for appreciating our work, and sharing these two useful command which we’ll review as soon as possible.

      Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.