How to Learn dd Command in Linux [15 Useful Examples]

Brief: In this advanced guide, we will discuss some practical examples of the dd command. After following this guide, advanced users will be able to work with the block devices comfortably from the command line interface.

In Linux, everything is a file and the block devices are not an exception to it. Often time, we need to work with block devices. As Linux users, we perform a variety of operations on block devices, such as, – taking a backup of a disk or partition, backing up Master Boot Record (MBR), making a bootable USB drive, and the list goes on.

Certainly, we can use graphical tools to perform all these operations. However, most Linux administrators prefer to use the dd command due to its rich functionality and robustness.

In this advanced guide, we will learn about the dd command to convert and copy files. However, unlike the cp command most of the time it’s used with block devices.

In this guide, first, we will understand the usage of the dd command with basic examples then we will discuss some advanced use cases.

So let’s get started.

dd Command Syntax

The most common syntax of the dd command is as follows:

$ dd [if=] [of=]

In the above syntax:

  • if – represents the input or source file.
  • of – represents the output or destination file.
Precaution – It is important to note that the dd command must be used very cautiously while working with the block devices. A small mistake can cause permanent data loss. Hence it is strongly commended to try out these operations on the test machine first.

1. How to Copy a File in Linux

One of the basic use of the dd command is to copy a file into a current directory. Let’s understand by creating a simple text file:

$ echo "this is a sample text file" > file-1.txt

Now, let’s create a copy of it using the dd command:

$ dd if=file-1.txt of=file-2.txt

In this example, the if parameter represents the source file whereas the of parameter represents the destination file.

Copy File with dd Command
Copy File with dd Command

Isn’t it exactly similar to the cp command? Then what’s so special about the dd command?

The dd command is much more powerful than the regular cp command. The latter sections of the tutorial discuss some of its advanced use cases.

2. How to Convert Text from Lowercase to Uppercase

The dd command allows us to perform case conversion. To achieve this we can use the conv parameter with it.

To understand this, first, display the contents of the file-1.txt file:

$ cat file-1.txt

this is a sample text file

Now, let’s convert the file contents to the upper case using the following command:

$ dd if=file-1.txt of=upper-case.txt conv=ucase

In this example, the conv=ucase option is used to convert the lowercase letters to uppercase letters.

Finally, verify the contents of the newly created file:

$ cat upper-case.txt

THIS IS A SAMPLE TEXT FILE
Convert Text from Lowercase to Uppercase in Linux
Convert Text from Lowercase to Uppercase in Linux

3. How to Convert Text from Uppercase to Lowercase

In a similar way, we can use the dd command to convert the upper case letters into lower case letters:

Let’s use the conv=lcase option to convert the upper case letters to lower case:

$ dd if=upper-case.txt of=lower-case.txt conv=lcase

Now, let’s display the contents of the newly created file and verify that the conversion has been done correctly:

$ cat lower-case.txt

this is a sample text file
Convert Text to Lowercase in Linux
Convert Text to Lowercase in Linux

4. Avoid Overwriting Destination File in Linux

By default, the dd command replaces the destination file, which means it will overwrite the file if it exists at the destination with the same name.

However, we can disable this default behavior using the conv=excl option as shown.

$ dd if=file-1.txt of=file-2.txt conv=excl

dd: failed to open ‘file-2.txt’ File exists

Here, we can see that the dd command has aborted the operations because the file with the same name is present at the destination.

5. Append Data in a File Using dd Command

Sometimes, we want to update the file in an append mode, which means the new contents should be added to the end of the destination file.

We can achieve this by combining the two flags – oflag=append and conv=notrunc. Here, the oflag represents the output flag whereas the notrunc option is used to disable the truncation at the destination.

To understand this, first, let’s create a new text file:

$ echo "append example demo" > dest.txt

Next, let’s append the contents to the dest.txt file using the following command:

$ dd if=file-1.txt of=dest.txt oflag=append conv=notrunc

Now, let’s check the contents of the dest.txt file:

$ cat dest.txt 

append example demo
this is a sample text file
Append Data to File Using dd Command
Append Data to File Using dd Command

6. Skip Bytes or Characters While Reading the Input File

We can instruct the dd command to skip the first few characters while reading the input file using the ibs and skip options.

First, let’s display the contents of the file-1.txt file:

$ cat file-1.txt

this is a sample text file

Next, let’s skip the first 8 characters by using the following command:

$ dd if=file-1.txt of=file-2.txt ibs=8 skip=1

Now, let’s verify the contents of the file-2.txt file:

$ cat file-2.txt

a sample text file
Skip Characters from File Using dd
Skip Characters from File Using dd

In the above output, we can see that the command has skipped the first 8 characters.

7. Backup Linux Disk Partition Using dd Command

So far we discussed the basic examples of the dd command that doesn’t require root access. Now, let’s see some advanced use cases.

Just like files, we can take the backup of the disk partition using the dd command. For example, the below command takes a backup of the /dev/sda1 partition to partition-bkp.img:

$ sudo dd if=/dev/sda1 of=partition-bkp.img
Backup Partition in Linux Using dd Command
Backup Partition in Linux Using dd Command

8. Restore Linux Disk Partition Using dd Command

In the previous example, we backed up the /dev/sda1 partition to the partition-bkp.img file.

Now, let’s restore it to the /dev/sdb1 partition using the following command:

$ sudo dd if=partition-bkp.img of=/dev/sdb1
Restore Linux Partition Using dd Command
Restore Linux Partition Using dd Command

It is important to note that, the size of the destination partition must be equal to or larger than the backup size.

9. Backup Entire Linux Hard Drive Using dd Command

The disk drive can have multiple partitions. So taking and restoring backup per partition can become time-consuming as the number of partitions increases. To overcome this limitation, we can back up the entire disk drive just like the partitions.

So, let’s take the backup of the /dev/sda disk using the following command:

$ sudo dd if=/dev/sda of=disk-bkp.img
Backup Entire Linux Hard Drive Using dd Command
Backup Entire Linux Hard Drive Using dd Command

The above command takes back up the entire disk including its partitions.

10. Restore the Linux Hard Drive Using dd Command

Just like partitions, we can restore the backup of the entire disk. In the previous example, we backed up the entire disk to the disk-bkp.img file. Now, let’s use the same to restore it on the /dev/sdb disk.

First, let’s delete all the partitions from the /dev/sdb disk and verify that all the partitions have been deleted:

$ lsblk /dev/sdb

Next, let’s restore the backup on the /dev/sdb drive using the following command:

$ sudo dd if=disk-bkp.img of=/dev/sdb

Finally, verify that the partition has been created on the /dev/sdb disk:

$ lsblk /dev/sdb
Restore Linux Hard Drive Using dd Command
Restore Linux Hard Drive Using dd Command

11. Backup Master Boot Record Using dd Command

The Master Boot Record (MBR) is located in the first sector of the boot disk. It stores information about the disk partitions. We can use the dd command as shown below to take a back of it:

$ sudo dd if=/dev/sda of=mbr.img bs=512 count=1

The above command takes back up the first 512 bytes i.e. one sector.

Backup MBR Using dd Command
Backup MBR Using dd Command

It is important to note that, the above command must be executed on the boot disk.

12. Restore Master Boot Record Using dd Command

In the previous example, we backed up the Master Boot Record (MBR). Now, let’s restore it on the /dev/sdb disk using the following command:

$ sudo dd if=mbr.img of=/dev/sdb
Restore MBR Using dd Command
Restore MBR Using dd Command

13. Copy CD/DVD Drive Content Using dd Command

Similar to the partitions and disks, we can use the dd command to copy contents from the CD or DVD drive. So let’s use the below command to do the same:

$ sudo dd if=/dev/cdrom of=alma-minimal.iso

In Linux, the CD/DVD drive is represented by the /dev/cdrom device. Hence we are using it as a source file.

Now, let’s verify that the contents have been copied successfully by verifying its checksum command:

$ sha256sum alma-minimal.is
Copy CD/DVD Contents Using dd Command
Copy CD/DVD Contents Using dd Command

14. Create a Bootable USB Drive Using dd Command

In the previous example, we created an iso image of the Alma Linux. Now let’s use it to create a bootable USB drive:

$ sudo dd if=alma-minimal.iso of=/dev/sdb
Create Bootable USB Using dd Command
Create Bootable USB Using dd Command

It is important to note that, the above command must be executed with the correct USB drive.

15. How to Show the Progress Bar

By default, the dd command doesn’t show the progress while doing the copy operation. However, we can override this default behavior using the status option.

So let’s use the status=progress option with the dd command to show the progress bar:

$ sudo dd if=alma-minimal.iso of=/dev/sdb status=progress
Show dd Command Progress
Show dd Command Progress
Conclusion

In this article, we discussed some practical examples of the dd command. Advanced users can refer to these examples in day-to-day life while working with Linux systems. However, we have to be very careful while executing these commands. Because a small mistake can overwrite the contents of the entire disk.

Do you know of any other best example of the dd command in Linux? Let us know your views in the comments below.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Narendra K
I'm an experienced and passionate software engineer with in-depth experience in Linux, Distributed systems, DevOps, and Cloud. My expertise lies in back-end web development, and the main languages in my tech stack are Java, Spring, Python, and Go. I’m a lifelong learner and an open-source enthusiast.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.