5 Best Tools to Find and Remove Duplicate Files in Linux

Organizing your home directory or even system can be particularly hard if you have the habit of downloading all kinds of stuff from the internet using your download managers.

Often you may find you have downloaded the same mp3, pdf, and epub (and all kinds of other file extensions) and copied it to different directories. This may cause your directories to become cluttered with all kinds of useless duplicated stuff.

In this tutorial, you are going to learn how to find and delete duplicate files in Linux using rdfind, fdupes, and rmlint command-line tools, as well as using GUI tools called DupeGuru and FSlint.

A note of caution – always be careful what you delete on your system as this may lead to unwanted data loss. If you are using a new tool, first try it in a test directory where deleting files will not be a problem.

1. Rdfind – Find Duplicate Files in Linux

Rdfind comes from redundant data find, which is a free command-line tool used to find duplicate files across or within multiple directories. It recursively scans directories and identifies files that have identical content, allowing you to take appropriate actions such as deleting or moving the duplicates.

Rdfind uses an algorithm to classify the files and detects which of the duplicates is the original file and considers the rest as duplicates.

The rules of ranking are:

  • If A was found while scanning an input argument earlier than B, A is higher ranked.
  • If A was found at a depth lower than B, A is higher ranked.
  • If A was found earlier than B, A is higher ranked.

The last rule is used particularly when two files are found in the same directory.

Install Rdfind on Linux

To install rdfind in Linux, use the following command as per your Linux distribution.

$ sudo apt install rdfind         [On Debian, Ubuntu and Mint]
$ sudo yum install rdfind         [On RHEL/CentOS/Fedora and Rocky/AlmaLinux]
$ sudo emerge -a sys-apps/rdfind  [On Gentoo Linux]
$ sudo apk add rdfind             [On Alpine Linux]
$ sudo pacman -S rdfind           [On Arch Linux]
$ sudo zypper install rdfind      [On OpenSUSE]    

To run rdfind on a directory simply type rdfind and the target directory.

$ rdfind /home/user
Find Duplicate Files in Linux
Find Duplicate Files in Linux

As you can see rdfind will save the results in a file called results.txt located in the same directory from where you ran the program. The file contains all the duplicate files that rdfind has found. You can review the file and remove the duplicate files manually if you want to.

Another thing you can do is to use the -dryrun an option that will provide a list of duplicates without taking any actions:

$ rdfind -dryrun true /home/user

When you find the duplicates, you can choose to replace them with hard links.

$ rdfind -makehardlinks true /home/user

And if you wish to delete the duplicates you can run.

$ rdfind -deleteduplicates true /home/user

To check other useful options of rdfind you can use the rdfind manual.

$ man rdfind 

2. Fdupes – Scan for Duplicate Files in Linux

Fdupes is another command-line program that allows you to identify duplicate files on your system. It searches directories recursively, comparing file sizes and content to identify duplicates.

It uses the following methods to determine duplicate files:

  • Comparing partial md5sum signatures
  • Comparing full md5sum signatures
  • byte-by-byte comparison verification

Just like rdfind, it has similar options:

  • Search recursively
  • Exclude empty files
  • Shows the size of duplicate files
  • Delete duplicates immediately
  • Exclude files with a different owner

Install Fdupes in Linux

To install fdupes in Linux, use the following command as per your Linux distribution.

$ sudo apt install fdupes         [On Debian, Ubuntu and Mint]
$ sudo yum install fdupes         [On RHEL/CentOS/Fedora and Rocky/AlmaLinux]
$ sudo emerge -a sys-apps/fdupes  [On Gentoo Linux]
$ sudo apk add fdupes             [On Alpine Linux]
$ sudo pacman -S fdupes           [On Arch Linux]
$ sudo zypper install fdupes      [On OpenSUSE]    

Fdupes syntax is similar to rdfind. Simply type the command followed by the directory you wish to scan.

$ fdupes <dir>

To search files recursively, you will have to specify the -r an option like this.

$ fdupes -r <dir>

You can also specify multiple directories and specify a dir to be searched recursively.

$ fdupes <dir1> -r <dir2>

To have fdupes calculate the size of the duplicate files use the -S option.

$ fdupes -S <dir>

To gather summarized information about the found files use the -m option.

$ fdupes -m <dir>
Scan Duplicate Files in Linux
Scan Duplicate Files in Linux

Finally, if you want to delete all duplicates use the -d an option like this.

$ fdupes -d <dir>

Fdupes will ask which of the found files to delete. You will need to enter the file number:

Delete Duplicate Files in Linux
Delete Duplicate Files in Linux

A solution that is definitely not recommended is to use the -N option which will result in preserving the first file only.

$ fdupes -dN <dir>

To get a list of available options to use with fdupes review the help page by running.

$ fdupes -help

3. Rmlint – Remove Duplicate Files

Rmlint is a command-line tool that is used for finding and removing duplicate and lint-like files in Linux systems. It helps identify files with identical content, as well as various forms of redundancy or lint, such as empty files, broken symbolic links, and orphaned files.

Install Rmlint on Linux

To install Rmlint in Linux, use the following command as per your Linux distribution.

$ sudo apt install rmlint         [On Debian, Ubuntu and Mint]
$ sudo yum install rmlint         [On RHEL/CentOS/Fedora and Rocky/AlmaLinux]
$ sudo emerge -a sys-apps/rmlint  [On Gentoo Linux]
$ sudo apk add rmlint             [On Alpine Linux]
$ sudo pacman -S rmlint           [On Arch Linux]
$ sudo zypper install rmlint      [On OpenSUSE]    
Rmlint - Remove Duplicate Files
Rmlint – Remove Duplicate Files

4. dupeGuru – Find Duplicate Files in a Linux

dupeGuru is an open-source and cross-platform tool that can be used to find duplicate files in a Linux system. The tool can either scan filenames or content in one or more folders. It also allows you to find the filename that is similar to the files you are searching for.

dupeGuru comes in different versions for Windows, Mac, and Linux platforms. Its quick fuzzy matching algorithm feature helps you to find duplicate files within a minute. It is customizable, you can pull the exact duplicate files you want to, and Wipeout unwanted files from the system.

Install dupeGuru on Linux

To install dupeGuru in Linux, use the following command as per your Linux distribution.

$ sudo apt install dupeguru         [On Debian, Ubuntu and Mint]
$ sudo yum install dupeguru         [On RHEL/CentOS/Fedora and Rocky/AlmaLinux]
$ sudo emerge -a sys-apps/dupeguru  [On Gentoo Linux]
$ sudo apk add dupeguru             [On Alpine Linux]
$ sudo pacman -S dupeguru           [On Arch Linux]
$ sudo zypper install dupeguru      [On OpenSUSE]    
DupeGuru - Find Duplicate Files in Linux
DupeGuru – Find Duplicate Files in Linux

5. FSlint – Duplicate File Finder for Linux

FSlint is a free utility that is used to find and clean various forms of lint on a filesystem. It also reports duplicate files, empty directories, temporary files, duplicate/conflicting (binary) names, bad symbolic links, and many more. It has both command-line and GUI modes.

However, it’s important to note that as of my knowledge cutoff in September 2022, FSlint was last updated in 2013 and may not be actively maintained or compatible with newer Linux distributions.

Install FSlint on Linux

To install FSlint in Linux, use the following command as per your Linux distribution.

$ sudo apt install fslint         [On Debian, Ubuntu and Mint]
$ sudo yum install fslint         [On RHEL/CentOS/Fedora and Rocky/AlmaLinux]
$ sudo emerge -a sys-apps/fslint  [On Gentoo Linux]
$ sudo apk add fslint             [On Alpine Linux]
$ sudo pacman -S fslint           [On Arch Linux]
$ sudo zypper install fslint      [On OpenSUSE]    
FSlint - Duplicate File Finder for -Linux
FSlint – Duplicate File Finder for -Linux
Conclusion

These are very useful tools to find duplicated files on your Linux system, but you should be very careful when deleting such files.

If you are unsure if you need a file or not, it would be better to create a backup of that file and remember its directory prior to deleting it. If you have any questions or comments, please submit them in the comment section below.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Marin Todorov
I am a bachelor in computer science and a Linux Foundation Certified System Administrator. Currently working as a Senior Technical support in the hosting industry. In my free time I like testing new software and inline skating.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

32 thoughts on “5 Best Tools to Find and Remove Duplicate Files in Linux”

  1. fslint is an excellent GUI tool for finding duplicate files in Linux systems, it also removes unnecessary or redundant files from the system.

    As per my knowledge, the last significant update to FSlint was in 2015, and there have been no new releases or updates since then.

    Reply
  2. fdupes command-line tool is very useful in finding duplicate files in Linux systems by comparing file sizes and checksums to determine file duplication…

    Reply
  3. rdfind -makehardlinks true /home/ivor
    Now scanning “/home/ivor”Dirlist.cc::handlepossiblefile: This should never happen. FIXME! details on the next row:
    possiblefile=”/home/ivor/zfs”
    , found 3007005 files.
    Now have 3007005 files in total.
    Removed 3609 files due to nonunique device and inode.
    Total size is 2828024427719 bytes or 3 TiB
    Removed 130576 files due to unique sizes from list.2872820 files left.
    Now eliminating candidates based on first bytes:

    Reply
  4. ~ / Downloads / fslint $ http://archive.ubuntu.com/ubuntu/pool/universe/f/fslint/fslint_2.46-1_all.deb
    bash: http://archive.ubuntu.com/ubuntu/pool/universe/f/fslint/fslint_2.46-1_all.deb: No such file or folder

    Let’s go, I will use “Duplicate Find Finder” on Windows XP, it is super.

    Reply
      • $ sudo apt install fslint
        
        Reading package lists... Done
        Building dependency tree       
        Reading state information... Done
        Package fslint is not available, but is referred to by another package.
        This may mean that the package is missing, has been obsoleted, or
        is only available from another source
        
        E: Package 'fslint' has no installation candidate
        
        Reply
          • @Sentile,

            I have already added a note about fsline tool, please read:

            However, it’s important to note that as of my knowledge cutoff in September 2022, FSlint was last updated in 2013 and may not be actively maintained or compatible with newer Linux distributions.

    • "http://archive.ubuntu.com/ubuntu/pool/universe/f/fslint/fslint_2.46-1_all.deb" is not a command!

      You need to download it with wget or similar, and then use “dpkg” to install it!

      Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.