10 Practical Examples Using Wildcards to Match Filenames in Linux

Wildcards (also referred to as meta characters) are symbols or special characters that represent other characters. You can use them with any command such as ls command or rm command to list or remove files matching a given criteria, receptively.

Read Also: 10 Useful Practical Examples on Chaining Operators in Linux

These wildcards are interpreted by the shell and the results are returned to the command you run. There are three main wildcards in Linux:

  • An asterisk (*) – matches one or more occurrences of any character, including no character.
  • Question mark (?) – represents or matches a single occurrence of any character.
  • Bracketed characters ([ ]) – matches any occurrence of character enclosed in the square brackets. It is possible to use different types of characters (alphanumeric characters): numbers, letters, other special characters etc.

You need to carefully choose which wildcard to use to match correct filenames: it is also possible to combine all of them in one operation as explained in the examples below.

How to Match Filenames Using Wildcards in Linux

For the purpose of this article, we will use following files to demonstrate each example.

createbackup.sh  list.sh  lspace.sh        speaker.sh
listopen.sh      lost.sh  rename-files.sh  topprocs.sh

1. This command matches all files with names starting with l (which is the prefix) and ending with one or more occurrences of any character.

$ ls -l l*	
List Files with Character
List Files with Character

2. This example shows another use of * to copy all filenames prefixed with users-0 and ending with one or more occurrences of any character.

$ mkdir -p users-info
$ ls users-0*
$ mv -v users-0* users-info/	# Option -v flag enables verbose output
List and Copy All Files
List and Copy All Files

3. The following command matches all files with names beginning with l followed by any single character and ending with st.sh (which is the suffix).

$ ls l?st.sh	
Match File with Character Name
Match File with Character Name

4. The command below matches all files with names starting with l followed by any of the characters in the square bracket but ending with st.sh.

$ ls l[abdcio]st.sh 
Matching Files with Names
Matching Files with Names

How to Combine Wildcards to Match Filenames in Linux

You can combine wildcards to build a complex filename matching criteria as described in the following examples.

5. This command will match all filenames prefixed with any two characters followed by st but ending with one or more occurrence of any character.

$ ls
$ ls ??st*
Match File Names with Prefix
Match File Names with Prefix

6. This example matches filenames starting with any of these characters [clst] and ending with one or more occurrence of any character.

$ ls
$ ls [clst]*
Match Files with Characters
Match Files with Characters

7. In this examples, only filenames starting with any of these characters [clst] followed by one of these [io] and then any single character, followed by a t and lastly, one or more occurrence of any character will be listed.

$ ls
$ ls [clst][io]?t*
List Files with Multiple Characters
List Files with Multiple Characters

8. Here, filenames prefixed with one or more occurrence of any character, followed by the letters tar and ending with one or more occurrence of any character will be removed.

$ ls
$ rm *tar*
$ ls
Remove Files with Character Letters
Remove Files with Character Letters

How to Match Characters Set in Linux

9. Now lets look at how to specify a set of characters. Consider the filenames below containing system users information.

$ ls

users-111.list  users-1AA.list  users-22A.list  users-2aB.txt   users-2ba.txt
users-111.txt   users-1AA.txt   users-22A.txt   users-2AB.txt   users-2bA.txt
users-11A.txt   users-1AB.list  users-2aA.txt   users-2ba.list
users-12A.txt   users-1AB.txt   users-2AB.list  users-2bA.list

This command will match all files whose name starts with users-i, followed by a number, a lower case letter or number, then a number and ends with one or more occurrences of any character.

$ ls users-[0-9][a-z0-9][0-9]*

The next command matches filenames beginning with users-i, followed by a number, a lower or upper case letter or number, then a number and ends with one or more occurrences of any character.

$ ls users-[0-9][a-zA-Z0-9][0-9]*

This command that follows will match all filenames beginning with users-i, followed by a number, a lower or upper case letter or number, then a lower or upper case letter and ends with one or more occurrences of any character.

$ ls users-[0-9][a-zA-Z0-9][a-zA-Z]*
Match Characters in Filenames
Match Characters in Filenames

How to Negate a Set of Characters in Linux

10. You can as well negate a set of characters using the ! symbol. The following command lists all filenames starting with users-i, followed by a number, any valid file naming character apart from a number, then a lower or upper case letter and ends with one or more occurrences of any character.

$ ls users-[0-9][!0-9][a-zA-Z]*

That’s all for now! If you have tried out the above examples, you should now have a good understanding of how wildcards work to match filenames in Linux.

You might also like to read these following articles that shows examples of using wildcards in Linux:

  1. How to Extract Tar Files to Specific or Different Directory in Linux
  2. 3 Ways to Delete All Files in a Directory Except One or Few Files with Extensions
  3. 10 Useful Tips for Writing Effective Bash Scripts in Linux
  4. How to Use Awk and Regular Expressions to Filter Text or String in Files

If you have any thing to share or a question(s) to ask, use the comment form below.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Aaron Kili
Aaron Kili is a Linux and F.O.S.S enthusiast, an upcoming Linux SysAdmin, web developer, and currently a content creator for TecMint who loves working with computers and strongly believes in sharing knowledge.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

5 thoughts on “10 Practical Examples Using Wildcards to Match Filenames in Linux”

  1. This gives all contents, as expected:

    $ ls /sys/class/net

    ens4 lo wlp0s26f7u2

    But this filter DOESN’T return wlp0s26f7u2, as expected:

    $  ls /sys/class/net/wl*
    
    addr_assign_type  carrier             dev_id    duplex             ifindex    name_assign_type  phys_port_id    proto_down  subsystem     wireless
    addr_len          carrier_changes     dev_port  flags              iflink     netdev_group      phys_port_name  queues      tx_queue_len
    address           carrier_down_count  device    gro_flush_timeout  link_mode  operstate         phys_switch_id  speed       type
    broadcast         carrier_up_count    dormant   ifalias            mtu        phy80211          power           statistics  uevent
    

    What am I doing wrong?

    thanks

    Reply
    • Actually, it did do the match as requested; the trick is that what it found wasn’t actually a flat-file. On my box, it’s actually a symbolic link to a directory. So what it’s actually showing is the contents of that directory.

      You can see this if you start with this:

      # ls -ld /sys/class/net/wl*
      
      Reply
    • @ks

      Here, a character means alphanumeric characters or all valid filename characters. It also matches no character(nothing).

      Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.